YBR 50 AC

Tubular motor with electronic limit switches, featuring a Yachtica® EasyBUS input located on the motor head. All motor functions can be managed via the Yachtica® Cabot programming software, which also ensures perfect alignment between multiple motors installed in the same environment. The motor is equipped with dry contacts, allowing direct operation even in the absence of an EasyBUS connection. Its key feature is extremely quiet operation with minimal vibration, ensuring maximum acoustic comfort. Thanks to its compact dimensions, the motor can be installed even in the most confined spaces and enables reduced wiring from the electrical panel. Soft Start and Soft Stop functions are electronically managed, allowing speed control based on the position relative to the end limits. Designed for extended operation without the risk of overheating.

Tubular Motor 100–240 VAC

Encoder
Electronic limit switches
Soft Start / Soft Stop
Dry contacts
Extremely quiet operation
100–240 VAC, 6 Nm, 20 rpm
Diameter: 35 mm

Electrical specifications

Power supply (Vac/Hz)	100-240 / 50-60
Electronic power supply (VDC)	20-28 V_DC
Current consumption (A)	0,8
Power (W)	50
Standby power consumption (W)	<0,5

Performance data

Torque (Nm)	6
Nominal speed (rpm)	20
Maximum speed (rpm)*	32
Minimum speed (rpm)	10
Noise level (dBA)**	35
Number of rotations before stop	<150
Operating time (min)	6
Lifted weight (kg)***	22

Dimensional data

Length (L) (mm)	744
Cable length (m)	1,5
Motor weight (kg)	1,5
Operating temperature (°C min/max)	0÷60
Packaging dimensions (mm)	795x100x100

Protection rating: IP30.
* If the speed is set above the nominal value, the motor torque is automatically reduced by 50%.
** Noise measurements were carried out in accordance with EN ISO 7345, EN ISO 3746, and EN 60704-1 standards, expressing the sound power emitted by the source in dBA.
*** Indicative value calculated using a 40 mm diameter roller. The actual value may vary depending on the specific installation.