MCR 808NX

The MCR 808NX is a programmable module with an integrated microcontroller, equipped with four pairs of relay outputs (up/down) with configurable software interlock, designed for motor control. The module allows control and management of electric motors at 12/24VDC/AC and 110/230VAC (with a maximum current draw of 16 A per output), as well as dry-contact devices such as control units for blinds or TV lifts.

Motors Management Module

4 programmable couple of outputs relay (16A max)
8 programmable dry contact inputs
Outputs hardware and software interlock
Advanced software encoder
EasyBUS communication
Programmable functionality via Cabot
Stand-alone mode
Control and monitoring display on the front panel
Dipswitches to set standard programming
DIN rail installation (6M)
Detachable terminal blocks
Conformal coating treatment

In addition to a standard programming that allows using it in stand-alone mode, connecting push-buttons or sensors to the 8 dry contact inputs, it is possible to customize the programming using the Yachtica® software Cabot. The module can communicate with other EasyBUS products by the system BUS. A useful display on the front panel, with some buttons, allows setting some parameters and the outputs monitoring and control. The recall of the programmed functions can be done by push-buttons, smartphone/tablet or touch screen.

Electronic power supply	20-28V_DC
Maximum electronic requirements	3,6W (150mA @24V_DC)
Outputs power supply	Max 280 V_AC
Load ratings	16A each
Dimensions (W x H x D)	106x58x90mm (6 M)