MCI 804LX

The MCI 804LX is a programmable module with an integrated microcontroller, equipped with four power outputs for the control and dimming of 12/24VDC lighting sources. The module allows control and management of monochromatic LED light sources powered by voltage (with or without additional electronics) or via a PWM signal (when equipped with a dedicated 3-wire driver). It can also manage incandescent or halogen lighting circuits powered at 12/24VDC. The maximum current deliverable by each output is 16 A.

Lighting Management Module 12/24 V_DC

4 programmable dimmer outputs 12/24V_DC (PWM 400Hz adjustable)
8 programmable dry contact inputs
EasyBUS communication
Stand-alone mode
Programmable functionality via Cabot
Advanced managing of overload and short circuit
Optoisolation between electronic and power
Control and monitoring display on the front panel
Dipswitches to set standard programming
DIN rail installation (6M)
Detachable terminal blocks
Conformal coating treatment

In addition to a standard programming that allows using it in stand-alone mode, connecting push-buttons or sensors to the 8 dry contact inputs, it is possible to customize the programming using the Yachtica® software Cabot. The module can communicate with other EasyBUS products by the system BUS. A useful display on the front panel, with buttons, allows setting some parameters and the outputs monitoring and control. The recall of the programmed functions can be done by push-buttons, smartphone/tablet or touch screen.

Electronic power supply	11-28V_DC
Maximum electronic requirements	0,6W (25mA @24V_DC, 50mA @12V_DC)
Outputs power supply	11/32V_DC
Load ratings	16A each, PWM 400Hz
Dimensions (W x H x D)	106x58x90mm (6 M)