DOLPHIN DALI

Marine electronic constant-current driver, multi-voltage and multi-current, designed for powering and dimming Power LEDs and LED modules on yachts. It is ideal for interior installations, featuring an IP20 design and the ability to be synchronized with up to 10 units.

Adjustable Marine Electronic Power Supplies – Multi-Current / Multi-Voltage DC for Power LEDs and LED Modules

  • Independent IP20 power supply, for indoor use.
  • Multi-power power supply equipped with DIP switches for output current selection.
  • Active PFC.
  • Synchronization cable supplied separately.
  • Up to 10 synchronized power supplies, with only one controlled from one or more points (1 Master + 9 Slaves).

DALI dimming features:

  • memory function for lighting scenes or groups;
  • recall of stored functions;
  • compatibility with standard DALI interfaces.
  • Class II protection against electric shock from direct and indirect contact.
  • Regulated output current ±5%, including temperature variations.
  • Supplied with terminal cover and cable gland.
  • Input and output terminals on the same side (maximum cable section: 1.5 mm²).
  • Cable glands on primary and secondary for cable diameters from 3 mm to 8 mm.
  • Mounting via slotted holes for screws.

Protections:

  • thermal and short-circuit protection;
  • protection against mains overvoltage;
  • overload protection.
  • Thermal protection: C.5.a.
  • Secondary-side on/off capability for current-driven LEDs (Power LEDs).
  • Suitable for powering Power LEDs and LED modules.
Reference Standards EN 50172 (VDE 0108); EN 55015; EN 60598-2-22; EN 61000-3-2; EN 61347-1; EN 61347-2-13; EN 61547; EN 62384; VDE 0710-T14
Rated Voltage AC 110 ÷ 240 V
Operating AC Voltage 100 ÷ 264 V
Operating DC Voltage 176 ÷ 264 V
Frequency 50 – 60 Hz
Power Range 0 ÷ 32 W
Light Sources Power LED

Download

Related products

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.