DIM 24PS

The DIM 24PS is a module with an integrated microcontroller, equipped with four power outputs for controlling 12/24VDC lighting sources, operating in dimmer or on/off mode. Le module permet le contrôle et la gestion de sources lumineuses LED monochromatiques alimentées en tension (avec ou sans électronique additionnelle) ou via un signal PWM (lorsqu’elles sont équipées d’un driver dédié à 3 fils). It can also manage incandescent and halogen lighting circuits powered at 12/24VDC. The maximum current deliverable by each output is 10 A.

Marine Dimmer Module 12/24VDC

  • 4 dimmer outputs or on/off (on positive) with memory 12/24VDC (PWM 200Hz)
  • 8 dry contact inputs
  • Electronic protection against overload and short circuit
  • DIN rail installation (6M)
  • Detachable terminal blocks
  • Conformal coating treatment

The module has 8 inputs that can be connected to any kind of dry contact, pushbuttons and sensors. The inputs can be used to manage the outputs in the 2 modes provided, dimmer or on / off. The setting of on board dipswtiches allows to link up to 4 outputs, to reach a maximum load of 40A.

 

Electronic power supply 11-28VDC
Maximum electronic requirements 0,6W (25mA @24VDC, 50mA @12VDC)
Outputs power supply 11/24VDC
Load ratings 10A each, PWM 200Hz
Dimensions (W x H x D) 106x58x90mm (6 M)

Download

Related products

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.